CARNIFORM 66

Mold oil based on organic solvent

 

Mold oil is suitable for easy separation of wooden and metal mold surfaces from concrete, which is designed based on mineral oils, separating additives and organic solvents in low viscosity conditions. Additives in CARNIFORM 66 create anti-foaming properties on the surface of the mold and in the place of contact with cement, which prevents air bubbles from being trapped between the concrete and the mold. The mold turns into concrete. According to the roughness of the surface of the mold, approximately 30 to 70 square meters are covered per liter.

Indications:

In concreting using sliding formwork, prefabricated concrete forms, forms under pressure and high temperature, etc.

Suitable for all kinds of wooden, metal and polymer molds and…

Advantages:

Has a separating agent by chemical interaction

Removing possible bubbles at the junction of formwork and concrete and creating a desirable surface

Reducing the cost of cleaning the mold after opening and increasing the life of the mold

Lack of effect on cement reactions due to the creation of a very thin layer and low consumption

Physical and chemical properties:

Chemical compounds, mineral oils, active additives and organic solvents
Light brown color
Specific weight (lit/Kg) 0.85 ± 0.02
Does not contain chloride (ppm).

Consumption:

According to the roughness of the surface of the mold, approximately 30 to 70 square meters are covered per liter.

packing:

CARNIFORM 66 is available in 20 gallons and 220 barrels.